#Interarchy 10 crashes on startup how to

If you can’t get Mini-CFE or Asus Restore utility to work try the method outlined in this comment.

power on device holding reset until power light blinks slowly

If the 30/30/30 reset doesn’t work try this:ģ.

If you have a fast connection you may benefit from Merlin or official builds as they have enabled hardware acceleration which allows the router to handle higher speeds.

Asus Rebadger is a script that automates this process on a Windows 10 PC.

flash instructions: flashInstructions_cDec04_16.pdf.

Nvram unset fw_check & nvram commit & reboot Video Examples: Mount -t jffs2 /dev/mtdblock5 /tmp/asus_jffs

Perform NVRAM Reset, wait for reboot /jffs/mtd5_backup.bin.

Upload new_cfe.bin & mtd-write & FW_RT_AC68U_x to router through WinSCP.Upload original_cfe.bin to > Select 1.0.2.0 US AiMesh as Source CFE > Download the new.In WinSCP refresh the window on the right side and note that original_cfe.bin is present.Tip: In WinSCP select SCP as file protocol, in Putty SSH Open Putty and WinSCP and connect them to 192.168.29.1 using a admin:admin or admin:password.Wait for reboot System > Enable SSH > Yes > Apply.If having trouble with this step perform NVRam Reset and try #6 again (see step #18) If Mini-CFE webpage won’t load use Asus Restore Utility Hold reset button and turn on router while holding reset for 10 seconds. Place router into Recovery/Restore mode.Start > run > ncpa.cpl > double click Ethernet > properties > IPV4 > It contains a firmware to downgrade to, a firmware to upgrade to, and mtd-write. Download this file and extract it to the newly made router folder.Create a folder on your desktop, name it “router”.Install the Asus Restore Utility, mirror.

Install WinSCP, Putty, and a file archiver ( click this link for ez).

#Interarchy 10 crashes on startup how to

(see below) How to flash AC1900 to AC68U: Do not update to new Asus or Merlin builds without executing code for fixing mtd5 partition.